Front Suspension Kit 6 Piece - Front Upper Control Arms, Lower Control Arm Bushes & Ball Joints Left Right for Tacoma S-Runner 2001-2004, Tacoma Base 2001-2004, DLX 2001-2003 RWD/2WD Models

The AUTOACER 6-Piece Front Suspension Kit is designed for Tacoma 2WD models from 1995 to 2004. Constructed from steel and rubber, the components are built to match original equipment specifications. The kit is adjustable, easy to replace, and does not require drilling for installation. Each part is designed to fit securely, helping restore front suspension functionality and alignment. This kit includes a total of 6 pieces: 2 front upper control arms with pre-fitted bushings and ball joints, 2 front lower control arm ball joints, and 2 front lower control arm bushings. The pre-assembled upper control arms allow for faster and more accurate installation. All parts are designed as direct replacements for OE/OEM part numbers 48066-35140, 48067-35050, 4806635120, 930031070, 48066-35120, 48067-35070, 4806635140, 4806635120, 4806735050, 4806735070, 43330-39365, 43330-39355, 43330-39565, 43330-39275, and 43340-39445. The kit is compatible with 2001–2004 Tacoma S-Runner (RWD/2WD), 2001–2004 Tacoma Base (RWD/2WD), 2001–2003 Tacoma DLX (RWD/2WD), and 1995–2000 Tacoma (RWD/2WD). It is not compatible with Pre-Runner 2WD or Tacoma 4WD models. Separate kits are available for 1995–2004 Tacoma 4WD models, which can be found by visiting the AUTOACER store or contacting support. Installation should be performed by a professional mechanic. Pressing in and removing bushings or ball joints requires specialized tools. For control arms, the old components should be removed carefully, mounting points cleaned, and new pre-fitted control arms installed securely. When replacing bushings, old bushings should be pressed out, seats cleaned, and new bushings pressed in while maintaining correct orientation. Ball joints should be removed and replaced with attention to proper seating. A professional wheel alignment is recommended after installation to maintain suspension geometry, proper tire wear, and safe handling. The AUTOACER 6-Piece Front Suspension Kit includes all necessary components to restore the upper and lower front suspension system. Each piece is designed for durability and long-lasting use under regular driving conditions. The kit is supported by a 2-year manufacturer’s warranty from AUTOACER, providing assistance and coverage if needed.

• Kit Includes: 2 Front Upper Control Arms, 2 Front Lower Arm Bushings, and 2 Front Lower Arm Ball Joints (Left & Right) for a complete and reliable front-end upgrade.
• Vehicle Compatibility: Fits Tacoma S-Runner (2001, 2002, 2003, 2004) RWD/2WD, Tacoma Base (2001, 2002, 2003, 2004) RWD/2WD, DLX (2001, 2002, 2003) RWD/2WD, and Tacoma (1995, 1996, 1997, 1998, 1999, 2000) RWD/2WD; not compatible with Pre-Runner 2WD or Tacoma 4WD models, for 1995–2004 Tacoma 4WD a different kit is available.
• OE/OEM Part Number: 48066-35140, 48067-35050, 4806635120, 930031070, 48066-35120, 48067-35070, 4806635140, 4806635120, 4806735050, 4806735070, 43330-39365, 43330-39355, 43330-39565, 43330-39275, 43340-39445.
• ASSEMBLY NOTES: Professional Installation Required - This product should be installed by a professional mechanic. Pressing in and removing bushings or ball joints requires specialized tools to ensure proper fitment. Incorrect installation may result in premature wear or suspension damage.
• Replacing the Control Arms: Remove the old control arms carefully. Clean the mounting points to ensure they are free from dirt and debris. Install the new pre-fitted control arms securely with proper alignment.
• Replacing the Bushings: Remove worn bushings using a press, clean the bushing seats, and press in new bushings while maintaining proper orientation to avoid binding.
• Replacing the Ball Joints: Remove the old ball joints carefully, clean the area, and press in the new ones properly to ensure a secure fit.
• Alignment Required: A professional wheel alignment is required after installation to ensure correct suspension geometry, proper tire wear, and safe handling.
• Reduced Maintenance: Designed to reduce maintenance needs, offering long-lasting durability. Reduces the need for frequent replacements and maintenance.
• Quality Assurance: AUTOACER is committed to providing high-quality products and exceptional customer support for any issues related to manufacturer defects.