Hydraulic Motor, Hydraulic Winch for Char-Lynn 101-1001-009 and Eaton 101-100, High Speed and High Torque Hydraulic Drive Motor for Harvesting Machines, Concrete Mixer

SpecificationMaterial: Cast Iron, Low Carbon Alloy SteelColor: BlackProcess: Powder MetallurgyAssembly Required: NoCompatible: For Char-Lynn 101-1001-009 and Eaton 101-1001Shaft: 2.54cm/1 Inch Straight w/Woodruff Key O-RingMount: 4 Bolt FlangePort Size: ½ NPTF Displacement: 50ML/R 1.69Oz/RFlow Rate: Continuous: 45LPM; Intermittent: 50LPMSpeed: Continuous: 879rpm; Intermittent: 975rpmPressure: Continuous: 12.5MPA; Intermittent: 16.5MPATorque: Continuous: 81N*M; Intermittent: 108N*MGross Weight: 5.5kg/ 12.13 lbs Product Size: 10*10*19.3cm/ 3.94*3.94*7.6 inPackage Size: 26*13*13cm/ 10.24*5.12*5.12inPackage Included1 * Hydraulic MotorNotes1.The normal operating oil temperature of this product is 68-140 ℉, and the maximum system operating temperature is 194 ℉ (not more than 1 hour).2.Filter filtration accuracy is 10-30 microns, and it is better to add a magnetic block at the bottom of the oil tank to stop metal chips from entering the system. The solid contamination level of working oil should not be higher than 19/16.3.Please select the appropriate hydraulic oil according to the actual operation and ambient temperature. The oil viscosity at 104 ° F is 42-74MM2/S.4.When used in series or parallel, the external drain must be used for pressure relief if the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM). It is better to connect the external drain directly with the oil tank.5.The best working condition of the motor should be selected at the rated working condition of 1/3-2/3.

• HIGH-QUALITY MATERIAL: This hydraulic motor adopts a powder metallurgy valve disc and low carbon alloy steel output shaft, with high wear resistance, high precision, and long service life.
• HIGH PRECISION: The precision processed stator and rotor whose flatness error does not exceed 0.08 inches have high precision.
• OWERFUL POWER: High speed (continuous: 879rpm; intermittent: 975rpm) and high torque (continuous: 81N*M; intermittent: 108N*M) bring you greater power.
• STRONG PRESSURE RESISTANCE: The S-type bearing shaft has a strong radial force and high-pressure resistance, which can effectively extend the service life of the hydraulic drive motor.
• WIDE APPLICATION: This hydraulic winch is generally applied to harvesting machines, augers, horizontal directional drilling rigs, coal mine type drilling rigs, trenching machines, lawn mower, food machinery, snow plow, concrete mixer, pump truck, sanitation machinery, machine tool, injection molding machinery, small crane, fishing machine, etc.